DTF (Direct To Film) transfer printing.
DTF (Direct To Film) transfer printing is a method that prints onto film with water-based inks, which is then coated with an adhesive powder so it can be heat-pressed onto fabric.
DTF transfers can be used with a wide range of fabrics as well as hard surfaces such as wood, metal and glass.
After receiving your prints, leave them to air out for 24 hours before transferring.
It is recommended that DTF transfers are applied using a heat press. For smaller items, you can use an iron.
Heat Press Instructions
- Pre-press the fabric to remove any moisture or creases
- Position the transfer on the fabric adhesive side down
- Press at 150°C for 10 seconds
- Remove fabric from heat press and peel transfer away from fabric
- Return the fabric to the heat press and cover with heat proof paper
- Press at 150°C for 10 seconds



Loading...